Posts for: July, 2016
For years preparing teeth for fillings or other restorations has required the use of a drill. Although quite effective in removing decayed structure and preparing the tooth for bonding, it usually requires a local anesthetic. That and the noise it generates can be unsettling for many patients.
In recent years, a different type of technique known as “air abrasion” has increased in popularity among dentists. Known also as “particle abrasion,” the technique uses a stream of fine particles to remove decayed tooth structure and is less invasive than the traditional drill. Although the technology has been around since the mid-20th Century, recent developments in suction pumps that remove much of the dust created have made it more practical. It also works well with new natural-looking bonding materials used for tooth structure replacement.
The fine particles — usually an abrasive substance like aluminum oxide — are rapidly discharged through a hand-held instrument using pressurized air aimed at affected tooth areas. Decayed teeth structure is softer than healthier tissue, which allows air abrasion to precisely remove decay while not damaging the other.
Besides removing decay or abrading the tooth for bonding, air abrasion can also be used to minimize stained areas on surface enamel and to clean blood, saliva or temporary cements from tooth surfaces during dental procedures. It’s also useful for smoothing out small defects in enamel or aiding in sealant applications.
It does, however, have a few limitations. It’s not as efficient as the traditional drill with larger cavities or for re-treating sites with metal (amalgam) fillings. Because of the fine texture of the abrasive particles, affected teeth need to be isolated within the mouth using a rubber dam or a silicone sheet. High-volume suction must be continually applied to capture the fine particles before the patient swallows them or it fills the procedure room with a fine cloud of material.
Still, while air abrasion technology is relatively new, it has clear advantages over the traditional drill in many procedures. As advances in the technology continue, air abrasion promises to offer a more comfortable and less invasive experience in dental treatment.
Do your misaligned teeth or bite issues take a toll on your confidence? Do you avoid repairing these issues due to not wanting a mouth full of metal with traditional braces? Fortunately, you can subtly and effectively straighten your teeth with Invisalign, the clear alternative to braces. This virtually invisible orthodontic treatment can repair your dental problems and give you a smile you love. Find out more with your dentist at Unique Dental Care in North Attleboro, MA.
How does Invisalign work?
Invisalign uses clear plastic aligner trays to slowly move the teeth into their correct positions. The number of trays in the series depends on the patient and the complexity of the orthodontic treatment required. Patients wear each tray in the series for about two weeks, after which they switch to the next tray. Most Invisalign patients see their dentist about once every six weeks for checkup appointments to ensure treatment is moving at the correct pace.
Invisalign Treatment in North Attleboro, MA
Patients wear their aligner trays for about 22 hours a day and remove them to eat or brush their teeth. Traditional braces require patients to avoid certain foods like popcorn or whole apples. Traditional braces also add several steps to the at-home oral care routine, requiring patients to use special threading floss to clean between each tooth’s wire and bracket. Invisalign patients simply remove their trays to brush and floss, rinse the tray and then replace it afterward, with no special steps necessary.
Is Invisalign right for me?
Invisalign is recommended for teens over the age of 12 and adults who wish to straighten their smile and correct their bite issues. Patients should be willing to commit to wearing their trays the proper amount of time as failing to do so can result in lengthened treatment time and further complications. Candidates for Invisalign should also have an extraordinary at-home oral care routine to keep their teeth healthy and clean during treatment.
For more information on Invisalign or to find out what this orthodontic treatment can do for you, please contact your dentist at Unique Dental Care in North Attleboro, MA. Call (508) 399-8800 to schedule your consultation for Invisalign today!
Magician Michel Grandinetti can levitate a 500-pound motorcycle, melt into a 7-foot-tall wall of solid steel, and make borrowed rings vanish and reappear baked inside bread. Yet the master illusionist admits to being in awe of the magic that dentists perform when it comes to transforming smiles. In fact, he told an interviewer that it’s “way more important magic than walking through a steel wall because you’re affecting people’s health… people’s confidence, and you’re really allowing people to… feel good about themselves.”
Michael speaks from experience. As a teenager, his own smile was enhanced through orthodontic treatment. Considering the career path he chose for himself — performing for multitudes both live and on TV — he calls wearing an orthodontic device (braces) to align his crooked teeth “life-changing.” He relies on his welcoming, slightly mischievous smile to welcome audiences and make the initial human connection.
A beautiful smile is definitely an asset regardless of whether you’re performing for thousands, passing another individual on a sidewalk or even, research suggests, interviewing for a job. Like Michael, however, some of us need a little help creating ours. If something about your teeth or gums is making you self-conscious and preventing you from smiling as broadly as you could be, we have plenty of solutions up our sleeve. Some of the most popular include:
- Tooth Whitening. Professional whitening in the dental office achieves faster results than doing it yourself at home, but either approach can noticeably brighten your smile.
- Bonding. A tooth-colored composite resin can be bonded to a tooth to replace missing tooth structure, such a chip.
- Veneers. This is a hard, thin shell of tooth-colored material bonded to the front surface of a tooth to change its color, shape, size and/or length; mask dental imperfections like stains, cracks, or chips, and compensating for excessive gum tissue.
- Crowns. Sometimes too much of a tooth is lost due to decay or trauma to support a veneer. Instead, capping it with a natural-looking porcelain crown can achieve the same types of improvements. A crown covers the entire tooth replacing more of its natural structure than a veneer does.
If you would like more information about ways in which you can transform your smile, please contact us or schedule an appointment for a consultation. You can also learn more about the techniques mentioned above by reading the Dear Doctor magazine articles “Teeth Whitening,” “Repairing Chipped Teeth,” and “Porcelain Crowns & Veneers.”
For over a hundred years dental amalgam — a combination of silver, mercury, tin and other metals — has been an effective filling material for teeth damaged by decay. But it has one major drawback — its metallic appearance stands out in stark contrast to the natural color of teeth.
As an alternative, composite resin fillings can match the color, shape and texture of natural teeth. These materials and the techniques used to bond them are proving just as effective as and more aesthetically pleasing than dental amalgam.
Fillings help protect and preserve a decayed tooth. By first removing decayed tooth structure through drilling, the resulting void is filled with durable material that strengthens the tooth and provides it protection from further decay.
The ultimate goal for restoration is to return the tooth to as near normal form and function as possible. Dental amalgam serves well in terms of function, providing the tooth strength in the face of the daily biting forces it encounters. In contrast, composite resins excel in appearance, but haven’t always matched the durability of amalgam. They’re material construction has improved over time, though, as well as the techniques used to bond them to teeth.
Most of these bonding techniques incorporate layering. The first step is to seal the dentin (the porous, living tissue just below the enamel); we then build up the composite material layer by layer within the tooth using special bonding adhesive and curing lights. In some cases where a large volume of tooth structure must be replaced, the restoration is first formed on the tooth and then removed for curing before being cemented into the tooth or a separate restoration is formed by a dental lab.
The end result is a tooth which both looks and functions like a fully intact tooth. Though care must be taken not to subject composite resin restorations to undue forces (no cracking open nutshells, for example), your new filling should continue to serve you and look great for a long time to come.
If you would like more information on metal-free restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “The Natural Beauty of Tooth Colored Fillings.”